Access Safety Compliance Training Inc.

What We Offer:

OSHA Certification Program

The OSHA Outreach Training Program provides training for workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in workplaces. The program also provides information regarding workers' rights, employer responsibilities, and how to file a complaint. This  program meets the training requirements for OSHA standards.

Through this program, workers can attend 10-hour or 30-hour classes delivered by only OSHA-authorized trainers. The 10-hour class is intended for entry level workers, while the 30-hour class is more appropriate for supervisors or workers with some safety responsibility. Through this training, Access Safety Compliance Training helps to ensure that workers are more knowledgeable about workplace hazards and their rights, and contribute to your company’s productivity.

Construction Industry    (29CFR1926)

These courses will cover OSHA policies, procedures, and standards for the construction industry   as well as safety and health principles. Each section of the OSHA Construction Standards will be covered. Special emphasis will be placed on those areas that are more hazardous, using OSHA standards as a guide. Upon completion all student will receive a Card from the Department of Labor (OSHA).

Topic                                                        Cost per Student

OSHA 10 Hour course in Construction                                           $125.00
OSHA 30 Hour course in Construction                                          $350.00

General Industry (29CFR1910)

This course for the General Industry sector personnel covers OSHA policies, procedures, and standards, as well as general industry safety and health principles. Topics include scope and application of the OSHA general industry standards. Special emphasis is placed on those areas that are the most hazardous, using OSHA standards as a guide. Upon completion all student will receive a Card from the Department of Labor (OSHA).

 Topic                                                              Cost per Student

OSHA 10 Hour course in Construction                                          $125.00
OSHA 30 Hour course in Construction                                         $350.00

OSHA Hazmat Courses

 Topic                                                              Cost per Student 

Hazwoper  8 Hour (Refresher)                    

 Hazwoper 24 Hour                                                                     $350.00

 Hazwoper 40 Hour                                                                    $475.00

Workplace Safety Classes

                                                                                             Cost per hour       
All SafetyTopics covered (min. of 5 topics)                                   $100.oo
Call for a current list, most topic are between 1 & 2 hours

American Safety And Health Institute

American Safety and Health Institute training programs offer an extensive catalog of emergency care courses with a “toolbox” approach to learning that allows our instructors the flexibility to train in a manner that best suits your needs.

    Our Feature Courses Offer:

  • First aid training
  • CPR /AED
  • Bloodborne Pathogens BBP
  • Basic Life Support

Our programs are designed to help organizations meet the regulatory requirements. All of our ASHI training courses use a video-base, instructor-facilitated, standardized approach. Our easy to comprehend courses provide a solid foundation of techniques and understandings that students can confidently apply in the event of an emergency.


 ASHI                                                                Cost per student

 Community CPR/AED (5.0 hours)                                                           $55.00

 Adult CPR/AED (3.0 hours)                                                                        $40.00

 Child CPR/AED (3.0 hours)                                                                         $40.00

 Infant CPR/AED (3.0 hours)                                                                        $40.00 


Adult, Child and Infant CPR /AED (5.5 hours)                            $85.00
First Aid / BloodBourne Pathogens (3.0 hours)                         $60.00

Adult CPR/AED BBP, BLS and First Aid (10 hours)                  $150.00 

                            CPR and AED Training
                    "Who Needs to Be Trained?"


There are some folks, though, who immediately jump to the top of the list, simply because of what they do:

Healthcare workers—If you have patient contact and work in contexts where CPR and first aid knowledge could be critical, up-to-date training may be required for you, and may include advanced training such as ACLS or PALS.

Lifeguards—You may be required to add oxygen administration to your emergency care “toolkit” along with CPR and AED. 

Personal Trainers—Many fitness centers and gyms require an AED onsite and staff trained in its use.

Employers with OSHA and other safety requirements—Some or all of your employees may be required to have training beyond CPR and AED, such as bloodborne pathogens and personal protective equipment training. See OSHA's Best Pracitces Guide: Fundamentals of a Workplace First Aid Program for more information. 

Childcare Providers—There is not a single state that does not require childcare providers to be CPR certified.

School Personnel (including teachers, PE teachers, coaches, volunteer coaches, and bus drivers)—More and more states are requiring at least one onsite AED for each school in a district, with a requirement for CPR and AED training for all school personnel as well. It used to be the case that one person trained in CPR would be onsite during the school day, but our regulatory department is seeing a trend towards schools requiring training for all personnel onsite all day and those onsite for all afterschool activities (sports or non-sports related).

ASCTraining offers AED and CPR courses to the general Public along with your Employee Workforce. You will find our courses are instructive, along with being fun and enjoyable. Please call to set up you next AED / CPR class.

OSHA Power Industrial Truck Certification

Powered industrial trucks, commonly called forklifts or lift trucks, are used in many industries, primarily to move materials. They can be used to move, raise, lower, or remove large objects or a number of smaller objects on pallets or in boxes, crates, or other containers.

The hazards commonly associated with powered industrial trucks vary depending on the vehicle type and the workplace where the truck is used. Each type of truck presents different operating hazards. For example, a sit-down, counterbalanced high lift rider truck is more likely than a motorized hand truck to be involved in a falling load accident, because the sit-down rider truck can lift a load much higher than a hand truck. Workplace
conditions also present different hazards. For example, retail establishments often face greater challenges than other worksites in maintaining pedestrian safety.

The best way to protect employees from injury depends on the training and certification of the operator along with the type of truck operated and worksite where it is being used. Access Safety Compliance has qualified Instructor who can come to your site and help your operators aquire the correct OSHA Training outline in 29CFR1910.178 Standard.

Power Industrial Truck Certification                                                         $125.00
Aerial Lift Operator Certification                                                                $125.00
Scissor Lift Operator Training                                                                      $125.00

Heavy Equipment Spotter Certification                                                    $110.00

Note: All the above courses are 4 to 6 hour classes depending on how many students will need certification.

Website Builder